Finetech Engineering

Gelbo Flex Tester Manufacturer in Gujarat | Finetech Engineering

ISO 9001:2015 certified - Finetech Engineering
BIS standards compliant testing equipment - Finetech Engineering
20 years of experience in testing equipment - Finetech Engineering
100+ customers served - Finetech Engineering

Overview

Gelbo Flex Tester

Finetech Engineering is a Gelbo flex tester manufacturer that pharma, packaging and petrochemical-film labs in Gujarat buy from directly: manufacturer, not a trader, built at Wagle Estate, Thane. Our ASTM F392 flex durability tester shows whether a barrier film or laminate survives the twisting and creasing of converting, filling and transport.

What is the Gelbo flex test? A 200 × 280 mm specimen on two mandrels is twisted and crushed – 440° over the first 90 mm of stroke, then a 65 mm push – at 45 cycles per minute. What does a Gelbo flex tester measure? The damage. You then count pinholes (dye or coloured turpentine) or compare OTR with an unflexed control – a pinhole flex test for barrier films run on a flexible packaging film testing machine.

Industries We Serve in Gujarat

Gujarat is a major pharma and chemicals state, and its GIDC estates also house flexible packaging converters and film makers.

ASTM F392 Conditions A to E - Which One for Your Film?

ASTM F392 conditions A to E explained: five conditions, set by cycle count at 45 cycles per minute.

Condition Flex type Cycles Time Use case
A Full flex (twist + crush) 2,700 60 min Most severe; clear-film seals can fail
B Full flex 900 20 min Intermediate, per specification
C Full flex 270 6 min Moderate; routine comparison
D Full flex 20 about 27 s Early-failure screen, e.g. delamination
E Partial flex only 20 about 27 s Gentlest, per specification

How many cycles are in a Gelbo flex test? 2,700, 900, 270 or 20 full-flex cycles (A-D), or 20 partial (E). How long does a Gelbo flex test take? 60, 20 or 6 minutes of flexing for A-C, under half a minute for D or E, plus loading and the pinhole check. Can a Gelbo flex test run as a quick screen? Condition D (full flex) or E (partial flex) runs 20 cycles in about 27 seconds, plus loading and the pinhole check.

Note: Your specification or customer agreement sets the condition, not ASTM F392 itself. Condition moisture-sensitive films first, and always run an unflexed control.

Gelbo Flex Tester Technical Specifications

Key technical data for the Gelbo flex tester dispatched to flexible packaging labs in Gujarat.

Parameter Specification
Testing Standard ASTM F392
Sample Dimensions 200 mm × 280 mm (8 in × 11 in)
Twisting Frequency 45 cycles per minute
Twisting Angle 400° or 440° (model dependent)
Stroke / Compression Distance 80 mm or 155 mm horizontal travel (model dependent)
Mandrel Diameter 90 mm, stainless steel
Drive System / Motor 1/2 HP, 1440 RPM gear motor with 45 rpm output, controlled by a Delta-make drive
Power Requirements 230 V AC, 50 Hz
Dimensions (approx.) 1000 mm (W) × 390 mm (D) × 340 mm (H)

Twist angle and stroke depend on the model. Earlier we described a 440° twist over the first 90 mm followed by a 65 mm push, 155 mm in all; that is the 440° / 155 mm configuration.

Why Choose Finetech Gelbo Flex Tester in Gujarat

Manufacturer, not a trader. A laboratory testing equipment manufacturer that labs in Gujarat deal with directly: built, calibrated and dispatched from Wagle Estate, Thane. We are a direct source for packaging film testing equipment that pharma and chemical labs in Gujarat need at the flex step.

Full and partial flex. Every ASTM F392 flex durability tester we ship to Gujarat runs Conditions A to E at 45 cycles per minute.

NABL traceable, ISO 9001:2015. Calibration certificates traceable to national standards; CE marked; direct factory supply.

One source for packaging QC lab equipment in Gujarat: Choosing between a Gelbo flex test and a dart impact test for packaging film? Run both – add our dart impact tester and humidity chamber.

Direct dispatch from Thane since 2023. Converters in Ahmedabad and Surat buy from us directly; we dispatch from Thane with installation, calibration and AMC. Orders from Sachin GIDC, Surat follow the same route.

See the full specifications on our main Gelbo flex tester page. We also supply and install Gelbo flex testers in other states: Gelbo flex tester in Andhra Pradesh · Gelbo flex tester in Karnataka · Gelbo flex tester in Maharashtra · Gelbo flex tester in Tamil Nadu · Gelbo flex tester in Telangana.

Related Products
Product Why Related

Dart Impact Tester

Impact puncture of films (ASTM D1709)

Universal Testing Machine (UTM)

Film tensile (ASTM D882) and seal strength (ASTM F88)

Humidity Chamber

Conditioning specimens before flexing

Rectangle Cutter

Cutting film strips for tensile testing

Demattia Flex Tester

Flex cracking of rubber (ASTM D430)

Ross Flex Tester

Cut growth of rubber soles (ASTM D1052)

Bennewart Flex Tester

Flex endurance of thin rubber components

Drop Tester

Drop testing of filled pouches and cartons

Vibration Tester

Transport simulation of packed goods

Gelbo Flex Tester
Cadbury logo
Aditya Birla Group logo
ELGI Rubber logo
Nestlé logo
ITC Limited logo
Blue Star logo
Hindustan Unilever logo
Brahmins logo
Nirapara logo
Pidilite logo

Request a Free Quote

All Equipments & specimen preparation products can be customised as per requirements.

All Equipments and specimen preparation products can be customised as per requirements
Name
Email
Phone Number
Message
Common Questions

Frequently Asked Questions

It conditions barrier films and laminates to ASTM F392, exposing pinholes, flex cracks and delamination. It measures the damage, assessed afterwards by pinhole count or OTR. Our Gelbo flex tester units make a pinhole flex test for barrier films practical.
Your specification decides; the standard fixes none per material (see ASTM F392 conditions A to E explained above). How do you screen foil laminate quickly with a Gelbo flex test? Foil cracks early, so try a short Condition D or E first (20 cycles for a quick screen), then a longer condition for ranking.
Yes. We dispatch a Gelbo flex tester to labs in Ahmedabad from Thane, ready to commission, along with barrier film flex crack testing equipment for packers in Surat. Send your film structure and condition (A-E) for a quotation. Can you buy a Gelbo flex tester in Ahmedabad directly from the manufacturer? Yes - you deal with the factory that builds, calibrates and dispatches it.
For a Gelbo flex tester price in India, we quote against your conditions and specimen stations - no invented figures, no generic list price. Send your flexible packaging testing equipment requirement via the form or WhatsApp.
Gelbo repeats twisting and crushing to expose pinholes and flex cracks, a fatigue-type failure; dart impact (ASTM D1709) drops a weight once to find the failure energy. We supply both as packaging QC lab equipment that plants in Gujarat can order together.