Finetech Engineering

Laboratory Testing Equipment for Plastic, Rubber & Paper Industries

Designed and Manufactured in Thane, Maharashtra, India for the Plastic, Rubber, and Paper industries. We are the manufacturers, suppliers of Laboratory Testing Equipments to Maharashtra, Kolkata, Tamil Nadu, Hyderabad ,and across India.

Trusted by Leading Brands

Our Intro

Introduction

Finetech Engineering designs and manufactures a comprehensive range of laboratory testing equipment for evaluating the mechanical, thermal, and physical properties of plastic, rubber, and paper materials. Every instrument we build is engineered for accuracy, repeatability, and compliance with international testing standards including ASTM, ISO, and BIS.

Whether your QC lab needs to measure melt flow rate, tensile strength, impact resistance, heat deflection, environmental stress cracking, or surface hardness — we manufacture the equipment to do it. And because we are manufacturers (not traders or resellers), we control quality from raw material to final calibration. Every machine leaves our Thane facility fully tested, with documentation and calibration certificates.

We also offer calibration services and Annual Maintenance Contracts (AMC) for all our equipment — so your lab stays accurate, compliant, and audit-ready long after the purchase.

Our Focused Industries

Plastic industry

Precision instruments for the Plastic, Rubber & Paper industries. MFI Testers, UTMs, Impact Testers, Humidity Chambers & more. ASTM/ISO/BIS compliant.

Rubber industry

In the rubber industry, testing equipment is used to evaluate flexibility, strength, and wear resistance. It helps ensure products meet quality expectations and perform reliably under different working conditions.

Paper industry

Standard and custom cutters for accurate test specimen preparation. Dumbbell, Tear, Round, Crescent & more. ASTM/ISO certified. NABL certification available.

Why us

Why Choose us for Laboratory Testing Equipment

Because industries trust us for accurate results, reliable performance, and solutions built with real engineering experience.

Manufacturer, not trader

Every machine is designed and built at our Thane facility. We control quality from component sourcing to final calibration. No imported reselling.

Calibration & AMC support

We don’t just sell equipment and disappear. Professional calibration services and Annual Maintenance Contracts keep your lab running accurately and audit-ready.

Complete testing ecosystem

Unlike single-product suppliers, we manufacture the full range — testing machines, specimen cutters & moulds, presses, grips, and industrial blades. One supplier for your entire lab setup.

Custom manufacturing

Non-standard size? Client-specific drawing? International standard we haven’t listed? We manufacture custom Laboratory Testing Equipment to your exact requirements.

Our Products

At Finetech Engineering, our experience drives the design and manufacturing of every product in this category. We understand the importance of accuracy, consistency, and performance in testing processes, which is why each product is built to meet real industry requirements.

Plastic Industry Products

Notch Cutter

The Notch Cutter is designed for precise sample preparation, especially for impact testing of plastic materials. It ensures uniform notches with high accuracy, helping laboratories achieve consistent and reliable test results.

Melting Point Apparatus

This equipment is used to determine the melting point of materials with precision. It is ideal for quality control and research applications where accurate temperature measurement is critical.

Burst Strength Tester

The Burst Strength Tester measures the strength of materials like packaging films and sheets under pressure. It helps evaluate durability and resistance, making it essential for packaging and material testing industries.

Flammability tester

The Flammability Tester is used to assess the fire resistance of plastic materials. It helps industries ensure safety compliance by measuring how materials behave when exposed to flame.

Vibration tester

This machine simulates real-world vibration conditions to test the durability and stability of products. It is widely used to evaluate how materials and packaging perform during transportation.

Drop Tester

The Drop Tester is designed to check the impact resistance of packaging and products. It helps identify potential damage during handling and shipping, ensuring better product safety.

Rubber Industry Products

DIN Abrasion Tester

The DIN Abrasion Tester measures the wear resistance of rubber materials. It is widely used to evaluate durability and performance under friction conditions.

Demattia flex tester

This tester evaluates the flex cracking resistance of rubber materials under repeated stress. It helps determine how materials perform under continuous bending conditions.

Pendulum Rebound Resilience Tester

This equipment measures the resilience or elasticity of rubber materials. It provides insights into energy return and material performance under dynamic conditions.

Ross flex tester

The Ross Flex Tester is used to assess the flex resistance of rubber and elastomer materials. It helps identify crack formation and durability under repeated flexing.

compression set

This tester measures the ability of rubber to return to its original shape after compression. It is essential for evaluating sealing materials and long-term performance.

Bennewart Flex Tester

The Bennewart Flex Tester evaluates the flexing endurance of rubber materials under continuous movement. It is commonly used for quality control and product durability testing.

Browse by Test Type

Mechanical Testing

Product	What It Tests	Key Standard(s)	Industries
Universal Testing Machine (UTM)	Tensile, compression, flexural, peel, bond strength	ASTM D638, D412, D882, D695, ISO 527	Plastic, Rubber, Packaging
Izod & Charpy Impact Tester	Impact resistance under sudden force	ASTM D256, D6110, ISO 179, ISO 180	Plastic
Dart Impact Tester	Falling dart impact resistance of films	ASTM D1709, ISO 7765	Plastic films, Packaging
Shore D Hardness Tester	Surface hardness of plastics and hard rubber	ASTM D2240, ISO 868	Plastic, Hard Rubber
DIN Abrasion Tester	Abrasion resistance of rubber	DIN 53516, ISO 4649, ASTM D5963	Rubber, Footwear, Tyres
Demattia Flex Tester	Flex crack growth resistance	ASTM D813, D430, ISO 132, IS 3400	Rubber, Footwear
Ross Flex Tester	Cut growth resistance under flexing	ASTM D1052, IS 3400	Rubber, Footwear
Bennewart Flex Tester	Flexing endurance of thin rubber	IS 3400, DIN 53522	Rubber
Pendulum Rebound Resilience Tester	Rebound resilience / elasticity	ASTM D1054, D2632, ISO 4662, DIN 53512	Rubber, Elastomers
Vertical Rebound Tester	Rebound resilience (vertical drop)	ASTM D2632, ISO 4662	Rubber
Compression Set Apparatus	Permanent deformation after compression	ASTM D395, ISO 815, IS 3400	Rubber, Seals, Gaskets
Burst Strength Tester	Bursting strength of paper/board	ISO 2758, ASTM D3786, TAPPI T403	Paper, Paperboard, Packaging

Thermal Testing

Product	What It Tests	Key Standard(s)	Industries
Melt Flow Index Tester (MFI)	Melt flow rate of thermoplastics	ASTM D1238, ISO 1133	Plastic
HDT / VSP Apparatus	Heat deflection temp & Vicat softening point	ASTM D648, D1525, ISO 75, ISO 306	Plastic
Muffle Furnace	Ash content, loss on ignition	General lab use, ASTM D5630	Plastic, Rubber, Ceramics
Hot Water Bath	Conditioning, shrinkage, environmental tests	IS 12235, IS 4984, various	Plastic pipes, General
Melting Point Apparatus	Melting point of crystalline materials	General lab use	Plastic, Pharma, Chemicals

Environmental Testing

Product	What It Tests	Key Standard(s)	Industries
Humidity Chamber	Temp & humidity conditioning/aging	IS 9000, various ASTM/ISO	Plastic, Rubber, Paper, Pharma
Environmental Stress Cracking Resistance (ESCR) Apparatus	Stress crack resistance of plastics	ASTM D1693, IS 2508	Plastic (HDPE pipes, bottles)
Flammability Tester	Burning rate / flame resistance	IS 3400, UL 94, ASTM D635	Plastic, Rubber, Textiles
Vibration Tester	Vibration endurance of products	IS 9000, various	Packaging, Electronics
Drop Tester	Drop/fall impact resistance	IS 7028, ASTM D5276	Packaging, Containers

Quality Inspection & Colour

Product	What It Tests	Key Standard(s)	Industries
Colour Matching Cabinet	Visual colour assessment under standard lighting	IS 14534, ASTM D1729	All manufacturing

Sample Preparation Equipment

Product	Purpose	Key Uses
Hydraulic Press (Manual)	Pressing cutters through sheet material; compression moulding	Specimen preparation, test plaque moulding
Manual Press	Lightweight hand-operated pressing for thin materials	Quick specimen cutting in QC labs
Pneumatic Press	Air-powered pressing for faster throughput	High-volume specimen preparation
Grips (various)	Holding specimens during tensile/compression testing	Used with UTM and tensile machines

Which Equipment Do I Need? — Quick Selection Guide

Select by What You Need to Measure

I Need to Measure…	You Need This Equipment	Standard
Melt flow rate of plastic granules	Melt Flow Index Tester	ASTM D1238, ISO 1133
Tensile strength of plastic	Universal Testing Machine + Dumbbell Cutter	ASTM D638, ISO 527
Tensile strength of rubber	Universal Testing Machine + Dumbbell Cutter	ASTM D412, ISO 37
Impact resistance of plastic (notched bar)	Izod & Charpy Impact Tester + Notch Cutter	ASTM D256, ISO 179/180
Impact resistance of plastic films	Dart Impact Tester	ASTM D1709, ISO 7765
Heat deflection temperature	HDT / VSP Apparatus	ASTM D648, ISO 75
Vicat softening point	HDT / VSP Apparatus	ASTM D1525, ISO 306
Abrasion resistance of rubber	DIN Abrasion Tester	DIN 53516, ISO 4649
Flex crack resistance of rubber	Demattia Flex Tester	ASTM D813, ISO 132
Cut growth resistance of rubber	Ross Flex Tester	ASTM D1052
Rebound resilience / elasticity	Pendulum or Vertical Rebound Tester	ASTM D2632, ISO 4662
Compression set of rubber seals	Compression Set Apparatus	ASTM D395, ISO 815
Hardness of plastic / hard rubber	Shore D Hardness Tester	ASTM D2240, ISO 868
Stress cracking resistance (HDPE)	ESCR Apparatus	ASTM D1693
Burst strength of paper/board	Burst Strength Tester	ISO 2758, ASTM D3786
Humidity / temperature conditioning	Humidity Chamber	IS 9000, various
Ash content / loss on ignition	Muffle Furnace	ASTM D5630
Flammability / burning rate	Flammability Tester	UL 94, ASTM D635
Colour consistency under standard light	Colour Matching Cabinet	ASTM D1729
Vibration endurance	Vibration Tester	IS 9000
Drop / fall impact	Drop Tester	ASTM D5276

Request a Free Quote

Customisation available for Laboratory Testing Equipment

Common Questions

Frequently Asked Questions

What types of materials can your equipment test?

Our laboratory testing equipment covers plastics (rigid, semi-rigid, films, pipes), rubber and elastomers (vulcanised rubber, TPE, silicone, natural rubber), and paper/paperboard. We manufacture instruments for mechanical testing (tensile, impact, hardness, abrasion, flex), thermal testing (melt flow, heat deflection, softening point), and environmental testing (humidity, stress cracking, flammability).

Which testing standards do your machines comply with?

Our equipment is built to comply with ASTM (American Society for Testing and Materials), ISO (International Organization for Standardization), BIS/IS (Bureau of Indian Standards), and DIN standards. Specific standard numbers are listed on each product page. The most common standards our customers test to include ASTM D1238, D638, D412, D256, D624, D395, D1693, ISO 1133, ISO 527, ISO 37, ISO 179, and IS 3400.

I’m setting up a new QC lab for plastic testing. What equipment do I need?

A typical plastic testing QC lab requires: a Melt Flow Index Tester (for raw material grading), a Universal Testing Machine (for tensile, compression, and flexural testing), an Izod/Charpy Impact Tester (for impact resistance), an HDT/VSP Apparatus (for thermal properties), a Humidity Chamber (for conditioning), a Muffle Furnace (for ash content), and specimen cutters and presses for sample preparation. We can provide a complete lab setup quote — call us to discuss your specific requirements.

I’m setting up a QC lab for rubber testing. What do I need?

A rubber testing QC lab typically needs: a Universal Testing Machine (for tensile and tear testing), a DIN Abrasion Tester, a Demattia Flex Tester, a Ross Flex Tester, a Pendulum Rebound Resilience Tester, a Shore Hardness Tester, a Compression Set Apparatus, specimen cutters (dumbbell, tear, crescent, round), and test moulds (flat sheet, compression set, hardness button). Contact us for a comprehensive lab setup quote.

Do you provide installation and training?

Yes. We provide installation support and operator training for all our equipment. Our team will set up your machines, verify calibration, and train your lab staff on operation, maintenance, and basic troubleshooting.

Do you offer calibration services after purchase?

Yes. We offer professional calibration services for all our testing equipment, along with Annual Maintenance Contracts (AMC) for scheduled servicing and priority support. Keeping your equipment calibrated is essential for accurate results and audit compliance.

What is the difference between a manufacturer and a trader?

A manufacturer designs and builds equipment in their own factory, controlling quality at every step. A trader buys finished products from other factories and resells them, often with limited quality oversight and no in-house repair capability. Finetech Engineering is a manufacturer — every machine we sell is built at our Thane facility, which means faster issue resolution, genuine spare parts, and direct engineering support.