Designed and Manufactured in Maharashtra for the Plastic, Rubber, and Paper industries. We are the largest manufacturers and suppliers of Specimen Cutters and Moulds to Maharashtra, Kolkata, Tamil Nadu, Hyderabad ,and across India.
Finetech Engineering is a dedicated specimen cutter manufacturer India – supplying precision specimen cutters and moulds manufacturer solutions to the plastic, rubber, and paper testing industries. Accurate test results start with accurate specimen preparation – and that starts with the cutting die. If a specimen is even slightly off-dimension, the tensile, tear, or impact test data your lab produces becomes unreliable, and your QC reports become questionable.
Every specimen cutter we manufacture is made from hardened tool steel (50-56 HRC) with precision-ground cutting edges, designed to produce clean, burr-free specimens conforming exactly to the dimensional tolerances specified in ASTM, ISO, and IS standards. As a specialist rubber specimen cutter India and rubber die cutter manufacturer India, we manufacture the full range – dumbbell (dogbone) cutters, tear cutters, crescent cutters, round cutters, rectangular strip cutters, and compression set moulds – all in-house at our Thane, Maharashtra facility.
Unlike traders who resell imported dies, Finetech Engineering is a genuine specimen cutters and moulds manufacturer that controls the entire manufacturing process from raw material to final dimensional inspection. Our ASTM ISO specimen cutting dies India are trusted by QC labs, R&D departments, and testing houses across India. We offer NABL-traceable certification for every specimen cutter, custom sizes to your exact drawing, and re-sharpening services to extend cutter life.
Whether you need test specimen preparation equipment India for rubber, plastic, or paper testing, Finetech Engineering is your single-source supplier for cutters, moulds, and the testing machines that use them.
At Finetech Engineering, we offer high-quality specimen cutters and moulds in India designed for accurate sample preparation. As a trusted provider of industrial specimen cutters and moulds in India, we deliver dumbbell cutting machines, and durable solutions with competitive specimen cutters and moulds price for testing laboratories.
For tear strength testing. Trouser tear (Type T) and angle tear specimens.
ASTM D624 (Type A, B, C, T), ISO 34-1
For tensile testing of plastics, rubber & elastomers. Most widely used specimen shape.
ASTM D412, D638, ISO 37, IS 3400
For crescent tear strength testing of vulcanised rubber and elastomers.
ASTM D624 Type A (crescent), ISO 34-1 Method C
For tension set, flex fatigue, and strip-based tensile testing.
ASTM D412 (straight), ASTM D4482, ISO 37 Type 2
This section helps your audience (QC managers who may not be standards experts) quickly find the right cutter. Display as a reference table on the page.
What Are You Testing? | You Need This Cutter | Applicable Standard |
Tensile strength of rubber / elastomers | Dumbbell Cutter (Die C recommended) | ASTM D412, ISO 37 |
Tensile strength of rigid plastics | Dumbbell Cutter (Type I recommended) | ASTM D638, ISO 527-2 |
Tensile strength of flexible plastics / films | Dumbbell Cutter (Type IV or V) | ASTM D638, ASTM D882 |
Tear strength of rubber | Tear Cutter (Type C angle) or Trouser Cutter (Type T) | ASTM D624, ISO 34-1 |
Crescent tear resistance | Crescent Cutter (Type A/B with nicker) | ASTM D624 Type A/B |
Compression set of rubber | Round Cutter + Compression Set Mould | ASTM D395, ISO 815 |
Hardness testing (Shore A/D) | Hardness Button Mould | ASTM D2240, ISO 868 |
Impact testing (Izod/Charpy) | Notch Cutter (V-notch or U-notch) | ASTM D256, ISO 179/180 |
Flex crack growth | Demattia Flex Mould + Rectangular Cutter | ASTM D430, ISO 132 |
Abrasion resistance (DIN) | DIN Abrasion Mould | DIN 53516, ISO 4649 |
Burst strength of paper/board | Round Cutter (specific diameter per standard) | ISO 2758, ASTM D3786 |
Tensile/tear of paper | Rectangular Strip Cutter (15mm / 50mm width) | ISO 1924, TAPPI T494 |
As a dedicated specimen cutter manufacturer India and specimen cutters and moulds manufacturer, every cutter and mould is made at our Thane facility. We control quality from raw material to final inspection. No imported reselling, no middlemen.
We provide NABL-traceable dimensional certification for every specimen cutter - essential for NABL-accredited labs, government tenders (GeM portal), and export-facing manufacturers who need documented proof of dimensional conformity.
As a full-range rubber specimen cutter India and rubber die cutter manufacturer India supplier, we cover dumbbell, tear, crescent, round, rectangular, notch cutters - plus all testing moulds. One supplier for all your specimen preparation needs.
Non-standard size? Client-specific drawing? As your ASTM ISO specimen cutting dies India manufacturer, we produce custom cutters and moulds to your exact requirements.
Customisation available for Specimen Cutters & Moulds
