Finetech Engineering is a Bennewart flex tester manufacturer that rubber labs in Telangana buy from directly: manufacturer, not a trader, built at Wagle Estate, Thane. Hyderabad’s rubber trade is broader than footwear, so this page starts with an honest scope: the Bennewart is a flex endurance tester for footwear rubber and soling sheet, and many other rubber products belong on a Ross or De Mattia. As a Bennewart Flex Tester manufacturer that labs in Telangana can source all three from, we match the machine to the product instead of selling one frame for everything.
What is the Bennewart flex test? A notched specimen is bent through 90° and the cut length is read in millimetres after the set count. How many cycles does it run? 30,000 flexes in the ISO 17707 and EN ISO 20344 outsole tests. The ISO 17707 outsole flex test covers moulded outsoles, while the SATRA TM161 Bennewart flex test method extends the same action to crack initiation and to sheet material.
Parameter | Specification |
Product Name | Bennewart Flex Tester (Thin Rubber Flexing Endurance Machine) |
Test Method | Repeated flexing of thin rubber specimens to failure |
Specimen | Thin rectangular rubber strip, 2–4 mm thick, per IS 3400/DIN 53522 |
Specimen Stations | Multiple (model-dependent) |
Flexing Frequency | Controlled, per standard specification |
Cycle Counter | Digital counter with auto-stop |
Drive | Electric motor |
Standards | IS 3400, DIN 53522 |
Power Supply | 230V AC, single phase, 50 Hz |
Certification | ISO 9001:2015 certified manufacturing |
Bennewart fits outsole-type specimens and SATRA TM161 material cut growth. Glove and thin-component specifications more often call for Ross or De Mattia (ISO 132) flexing – confirm which your buyer cites. Which flex tester suits which rubber product? Bennewart for outsoles and soling sheet, Ross (ASTM D1052 / IS 3400 Part 16) for a pierced strip bent over a rod, and De Mattia (ISO 132) for a grooved moulded strip checked for crack initiation and growth.
| Standard | Method | Test parameter |
ISO 17707 |
Footwear outsole flex resistance (Bennewart) |
Pre-cut outsole flexed; notch growth in mm |
EN ISO 20344 / 20345 |
Safety footwear outsole flex |
30,000 flexes; notch growth in mm |
SATRA TM161 |
Bennewart flex test – cut growth |
90° flex; outsole cut growth, crack initiation, or material cut growth |
ASTM D1052 / IS 3400 Part 16 |
Ross flexing – a different machine |
Pierced strip bent 90° over a rod; cut growth tracked |
What is the difference between a Bennewart and a Ross flex tester? Both measure cut growth under 90° bending, but they are different machines with different specimens, so results are not interchangeable. Note that ASTM D1052 is the Ross method; Bennewart follows ISO 17707 and SATRA TM161. How does an ISO 132 De Mattia test differ from a Bennewart test? ISO 132 flexes a grooved, moulded rubber strip and rates crack initiation and growth, while a Bennewart flexes a notched sole or sheet specimen through 90° under ISO 17707 or SATRA TM161, so the two results answer different questions.
Manufacturer, not a trader. A laboratory testing equipment manufacturer that labs in Telangana deal with directly. You reach the factory, not a dealer, and the same team quotes a Ross or De Mattia if your product needs one.
NABL traceable, ISO 9001:2015. CE marked; direct factory supply – we quote your flex endurance tester for footwear rubber against your standard.
Direct dispatch from Thane since 2023. Labs in Hyderabad and Secunderabad buy from us directly; we dispatch from Thane with installation and AMC. Hyderabad labs can approach us with the product drawing first and the machine choice second.
See the full specifications on our main Bennewart flex tester page. We also supply and install Bennewart flex testers in other states: Bennewart flex tester in Andhra Pradesh · Bennewart flex tester in Gujarat · Bennewart flex tester in Karnataka · Bennewart flex tester in Maharashtra · Bennewart flex tester in Tamil Nadu.
| Product | Why Related |
Complementary flex testing for standard-thickness specimens |
|
Complementary cut growth testing |
|
Complementary abrasion testing |
|
Complementary tensile testing |
|
Specimen preparation tools |
All Equipments & specimen preparation products can be customised as per requirements.
Our Bennewart flex testers measure cut or crack growth in outsole and soling material under repeated 90° flexing - that is the Bennewart flex test in one line. For thin rubber components, see the FAQ below.
ISO 17707, the outsole-flex clauses of EN ISO 20344/20345, and SATRA TM161; under EN ISO 20344 the test runs 30,000 flexes. Asked about an IS 3400 flex test procedure? The Indian rubber cut-growth method we can confirm is IS 3400 Part 16, the Ross method; tell us the standard your buyer cites. Keep the ISO 17707 outsole flex test and the SATRA TM161 Bennewart flex test method on the Bennewart; an ISO 132 requirement needs a De Mattia, and ASTM D1052 a Ross.
Start from the standard named on the component drawing. None of the three machines is built around very thin finished parts; for compound screening, a De Mattia (ISO 132) moulded strip or a Ross (ASTM D1052) pierced strip is the usual route, and a Bennewart applies where the buyer names SATRA TM161 material cut growth. Because labs in Telangana can source all three from us, we quote whichever machine your drawing names.
Yes. We dispatch from Thane to Hyderabad and Secunderabad, and labs in Secunderabad can order the same way. Send your standard and specimen type for a quotation. There is no dealer in between, so you get the factory's own quote.
For a Bennewart flex tester price in India, we quote against your standard and specimen type - no invented figures. Send your requirement via the form or WhatsApp.
Ross flexing (ASTM D1052) bends a pierced rubber strip over a rod - see the comparison above; ASTM D1052 flex endurance testing of rubber is a Ross job. Bennewart tests outsoles and sole materials, not uppers. For which flex tester suits which product, and how De Mattia differs from Bennewart, see the Industries and Standards sections. For rubber gloves: not for finished gloves; see the Jeedimetla note above.