Finetech Engineering

Bennewart Flex Tester Manufacturer Gujarat

Bennewart Flex Tester for Footwear Rubber & Rubber Goods Manufacturers in Gujarat

Finetech Engineering is a Bennewart flex tester manufacturer Gujarat sole-compound and footwear labs buy from directly: manufacturer, not trader, built at Wagle Estate, Thane. For Gujarat labs working one step before the shoe, at the PVC, TPR or EVA compound stage, this flex endurance tester for footwear rubber and polymer soling is a recipe tool as much as a pass/fail check: a notched specimen bends through 90°, and the cut growth shows how the compound will behave at the sole’s flex line. As a Bennewart Flex Tester manufacturer Gujarat compounders can deal with without an agent, we set it up for the specimen your compound lab moulds.

Answering ‘what is Bennewart flex test’: a notched specimen of sole or sole compound is flexed repeatedly, and cut growth is read in millimetres at the end of the count. Answering ‘how many cycles Bennewart flex test’: 30,000 flexes in the ISO 17707 and EN ISO 20344 outsole tests; compound screening can use a different count if the buyer’s method sets one. The ISO 17707 outsole flex test checks a finished outsole, while the SATRA TM161 bennewart flex test method adds a material cut-growth variant that suits sole compound flex cut growth testing on moulded sheet.

Specifications

Parameter

Specification

Product Name

Bennewart Flex Tester (Thin Rubber Flexing Endurance Machine)

Test Method

Repeated flexing of thin rubber specimens to failure

Specimen

Thin rectangular rubber strip, 2–4 mm thick, per IS 3400/DIN 53522

Specimen Stations

Multiple (model-dependent)

Flexing Frequency

Controlled, per standard specification

Cycle Counter

Digital counter with auto-stop

Drive

Electric motor

Standards

IS 3400, DIN 53522

Power Supply

230V AC, single phase, 50 Hz

Certification

ISO 9001:2015 certified manufacturing

Industries We Serve in Gujarat

Bennewart fits outsole-type specimens and SATRA TM161 material cut growth. Thin rubber sheet and glove-rubber specifications more often call for Ross or De Mattia (ISO 132) flexing, and upper materials are flexed on different equipment – confirm which your buyer cites. Answering ‘how does compound formulation affect outsole flex resistance’: plasticiser level in PVC, filler loading, polymer blend ratio, cure or crosslink state, and foam density in EVA all change how fast a notch grows, so changing one formulation variable at a time gives the cleanest comparison.

Standards Compliance - ISO 17707, EN ISO 20344, SATRA TM161
Standard Method Test parameter

ISO 17707

Footwear outsole flex resistance (Bennewart)

Pre-cut outsole flexed; notch growth in mm

EN ISO 20344 / 20345

Safety footwear outsole flex

30,000 flexes; notch growth in mm

SATRA TM161

Bennewart flex test – cut growth on flexing

90° flex; outsole cut growth, crack initiation, or material cut growth

ASTM D1052 / IS 3400 Part 16

Ross flexing – a different machine

Pierced strip bent 90° over a rod; cut growth tracked

Answering ‘difference Bennewart vs Ross flex tester’: both measure cut growth under 90° bending, but they are different machines with different specimens – Bennewart for outsoles and sole materials, Ross for a pierced rubber strip – so results are not interchangeable. Searching ‘ASTM D1052 bennewart flex tester India’? ASTM D1052 is the Ross method; Bennewart outsole testing follows ISO 17707 and SATRA TM161. Searching ‘PVC footwear compound flex test’? PVC soling is flexed on the same Bennewart under SATRA TM161 or ISO 17707; the standard your buyer names decides the specimen.

Why Choose Finetech Bennewart Flex Tester in Gujarat

Manufacturer, not trader. A laboratory testing equipment manufacturer Gujarat labs deal with directly: built, calibrated and dispatched from Wagle Estate, Thane. As a footwear sole flex testing machine supplier Gujarat compounders deal with at the factory, we can also supply matching specimen cutters so every notch starts the same.

NABL traceable, ISO 9001:2015. Calibration certificates traceable to national standards; CE marked.

Direct factory supply. We quote your flex endurance tester for footwear rubber for the compounds you actually mould – PVC, TPR, EVA or rubber – with no reseller margin added.

Local supply since 2023. As a bennewart flex tester supplier Ahmedabad and Surat labs use, we dispatch from Thane with installation, calibration and AMC. Searching ‘bennewart flex tester dealer Ahmedabad’? GIDC Vatva buyers reach the factory directly, with no dealer margin to pay.

Related Products
Product Why Related

Demattia Flex Tester

Complementary flex testing for standard-thickness specimens

Ross Flex Tester

Complementary cut growth testing

DIN Abrasion Tester

Complementary abrasion testing

Universal Testing Machine (UTM)

Complementary tensile testing

Specimen Cutters & Moulds

Specimen preparation tools

Cadbury_logo_new
Aditya_Birla_Group_Logo
elgl logo
Nestlé logo
ITC Logo
Blue Star Logo
Hindustan_Unilever_Logo
brahmins Logo
Nirapara_logo
Pidilite logo

Request a Free Quote

All Equipments & specimen preparation products can be customised as per requirements.

All Equipments and specimen preparation products can be customised as per requirements
Name
Email
Phone Number
Message
Common Questions

FAQ - Bennewart Flex Tester in Gujarat

Our Bennewart flex tester manufacturer Gujarat units measure cut or crack growth in outsoles and sole compounds under repeated 90° flexing - that is 'what is Bennewart flex test' in practice. For compound labs, the result is most useful as sole compound flex cut growth testing that ranks recipes, not only as a single pass/fail.

ISO 17707, the outsole-flex clauses of EN ISO 20344/20345, and SATRA TM161; for 'how many cycles Bennewart flex test' under EN ISO 20344, it is 30,000 flexes. Searching 'IS 3400 Part 25 flex test procedure'? The Indian rubber cut-growth method we can confirm is IS 3400 Part 16, the Ross method; tell us the standard your buyer cites and we will confirm the configuration. For sheet compounds, the SATRA TM161 bennewart flex test method is the usual reference; for a finished sole, the ISO 17707 outsole flex test.

Answering 'compare outsole compound recipes flex test': change one ingredient per recipe, keep the sheet thickness, notch length, conditioning and flex count identical, flex all recipes in the same run, and record notch growth in mm for each. That is sole compound flex cut growth testing in practice, and it answers 'how does compound formulation affect outsole flex resistance' before you commit to a production batch. As a Bennewart Flex Tester manufacturer Gujarat labs can call, we help set up the first comparison run at installation.

Yes. As a bennewart flex tester supplier Ahmedabad buyers use, we dispatch from Thane to Ahmedabad and Surat. Searching 'buy bennewart flex tester Gujarat'? Send your standard and specimen type for a quotation. Surat labs can order a bennewart flex tester Surat delivery the same way. Buyers searching 'bennewart flex tester dealer Ahmedabad' get the same factory-direct quote.

For bennewart flex tester price India enquiries we quote against your standard and specimen type - no invented figures, no generic list price. Send your requirement through the form or WhatsApp.

Ross flexing (ASTM D1052, IS 3400 Part 16) bends a pierced rubber strip over a rod - see 'difference Bennewart vs Ross flex tester' above; searching 'ASTM D1052 flex endurance test rubber' leads to Ross. Searching 'Bennewart flex test shoe upper rubber'? Bennewart tests outsoles and sole materials, not uppers. For 'compare outsole compound recipes flex test', see the recipe FAQ above; Ross and De Mattia results should not be mixed into a Bennewart recipe comparison.