Finetech Engineering is a Bennewart flex tester manufacturer that footwear and rubber labs in Maharashtra buy from directly: manufacturer, not a trader, built at Wagle Estate, Thane. It is a flex endurance tester for footwear rubber: it flexes a sole or rubber specimen through 90° and measures how a cut or crack grows. As a Bennewart Flex Tester manufacturer that shoe and sole makers in Maharashtra deal with directly, we build each unit in-house rather than reselling an imported frame.
What is the Bennewart flex test? A pre-cut outsole or rubber specimen is flexed repeatedly, and the growth of the cut – or the appearance of cracks – is measured after a fixed number of flexes. The result is growth in millimetres. How many cycles does it run? The ISO 17707 and EN ISO 20344 outsole tests use 30,000 flexes; other methods set their own count. How does the ISO 17707 outsole flex test work? The outsole is notched, flexed through 90° over a mandrel for the set count, and the notch is measured before and after. Safety-footwear makers in Maharashtra usually quote the 30,000-flex EN ISO 20344 outsole flex resistance figure to their buyers.
Parameter | Specification |
Product Name | Bennewart Flex Tester (Thin Rubber Flexing Endurance Machine) |
Test Method | Repeated flexing of thin rubber specimens to failure |
Specimen | Thin rectangular rubber strip, 2–4 mm thick, per IS 3400/DIN 53522 |
Specimen Stations | Multiple (model-dependent) |
Flexing Frequency | Controlled, per standard specification |
Cycle Counter | Digital counter with auto-stop |
Drive | Electric motor |
Standards | IS 3400, DIN 53522 |
Power Supply | 230V AC, single phase, 50 Hz |
Certification | ISO 9001:2015 certified manufacturing |
Wherever outsoles and rubber compounds are developed, cut-growth data decides whether a compound goes forward. Plants comparing footwear sole flex testing machine suppliers in Maharashtra should first confirm which method the buyer’s specification names.
| Standard | Method | Test parameter |
ISO 17707 |
Footwear outsole flex resistance (Bennewart) |
Pre-cut outsole flexed; notch growth in mm |
EN ISO 20344 / 20345 |
Safety and protective footwear outsole flex |
30,000 flexes; notch growth in mm |
SATRA TM161 |
Bennewart flex test – cut growth on flexing |
90° flex; outsole cut growth, crack initiation, or material cut growth |
ASTM D1052 / IS 3400 Part 16 |
Ross flexing – a different machine |
Pierced strip bent 90° over a rod; cut growth tracked |
What is the difference between a Bennewart and a Ross flex tester? Both measure cut growth under 90° bending, but they are different machines with different specimens – Bennewart for outsoles and sole materials, Ross for a pierced rubber strip – so results are not interchangeable. Note that ASTM D1052 is the Ross method; Bennewart outsole testing follows ISO 17707 and SATRA TM161. Which flex test does a footwear outsole need? A moulded or finished outsole needs the Bennewart method under ISO 17707 or SATRA TM161; Ross suits a pierced rubber strip, not a sole.
Manufacturer, not a trader. A laboratory testing equipment manufacturer that labs in Maharashtra deal with directly: built, calibrated and dispatched from Wagle Estate, Thane. There is no dealer layer: Finetech Engineering builds, calibrates and services the machine itself.
NABL traceable, ISO 9001:2015. Calibration certificates traceable to national standards; CE marked.
Direct factory supply. No reseller margin; we quote your flex endurance tester for footwear rubber against your standard and specimen type. Each outsole flex resistance tester is quoted with the mandrel and clamp set your method needs.
Local supply since 2023. Labs in Mumbai and Pune buy from us directly; we dispatch from Thane with installation, calibration and AMC. Labs in Maharashtra can call us for on-site calibration from Wagle Estate.
See the full specifications on our main Bennewart flex tester page. We also supply and install Bennewart flex testers in other states: Bennewart flex tester in Andhra Pradesh · Bennewart flex tester in Gujarat · Bennewart flex tester in Karnataka · Bennewart flex tester in Tamil Nadu · Bennewart flex tester in Telangana.
| Product | Why Related |
Complementary flex testing for standard-thickness specimens |
|
Complementary cut growth testing |
|
Complementary abrasion testing |
|
Complementary tensile testing |
|
Specimen preparation tools |
All Equipments & specimen preparation products can be customised as per requirements.
It measures how a cut or crack grows in outsole and rubber material under repeated 90° flexing. Our Bennewart flex testers run this test for footwear labs; most Maharashtra safety-footwear labs use it for the 30,000-flex EN ISO 20344 outsole flex resistance check.
ISO 17707, the outsole-flex clauses of EN ISO 20344/20345, and SATRA TM161; under EN ISO 20344 the test runs 30,000 flexes. Asked about an IS 3400 flex test procedure? The Indian rubber cut-growth method we can confirm is IS 3400 Part 16, which is the Ross method; tell us the standard your buyer cites and we will confirm the configuration. Put simply, an ISO 17707 outsole flex test means: notch, flex 90° for the set count, measure the notch growth in mm. The SATRA TM161 Bennewart flex test method adds crack-initiation and material cut-growth variants.
Read the cut length with a calibrated gauge before flexing, flex for the specified count, then read it again at the same points; notch growth is the difference in mm. We cover this reading method during installation training.
Yes. We dispatch from Thane to Mumbai and Pune, and labs in Pune can order the same way. Send your standard and specimen type for a quotation.
For a Bennewart flex tester price in India, we quote against your standard and specimen type - no invented figures, no generic list price. Send your requirement through the form or WhatsApp. If you are comparing us with a dealer listing online, note that our quote is factory-direct.
Ross flexing (ASTM D1052, IS 3400 Part 16) bends a pierced rubber strip over a rod - see the comparison above; ASTM D1052 flex endurance testing of rubber is a Ross job. Bennewart tests outsoles and sole materials; upper materials are flexed on different equipment. Both cut-growth and crack-initiation outsole flex tests are covered by SATRA TM161, so both run on the same Bennewart. For which flex test a footwear outsole needs, the short answer is Bennewart for soles, Ross for strips.