Finetech Engineering

Bennewart Flex Tester Manufacturer in Telangana | Finetech Engineering

Bennewart Flex Tester for Rubber Goods & Rubber Component Manufacturers in Telangana

Finetech Engineering is a Bennewart flex tester manufacturer that rubber labs in Telangana buy from directly: manufacturer, not a trader, built at Wagle Estate, Thane. Hyderabad’s rubber trade is broader than footwear, so this page starts with an honest scope: the Bennewart is a flex endurance tester for footwear rubber and soling sheet, and many other rubber products belong on a Ross or De Mattia. As a Bennewart Flex Tester manufacturer that labs in Telangana can source all three from, we match the machine to the product instead of selling one frame for everything.

What is the Bennewart flex test? A notched specimen is bent through 90° and the cut length is read in millimetres after the set count. How many cycles does it run? 30,000 flexes in the ISO 17707 and EN ISO 20344 outsole tests. The ISO 17707 outsole flex test covers moulded outsoles, while the SATRA TM161 Bennewart flex test method extends the same action to crack initiation and to sheet material.

Specifications

Parameter

Specification

Product Name

Bennewart Flex Tester (Thin Rubber Flexing Endurance Machine)

Test Method

Repeated flexing of thin rubber specimens to failure

Specimen

Thin rectangular rubber strip, 2–4 mm thick, per IS 3400/DIN 53522

Specimen Stations

Multiple (model-dependent)

Flexing Frequency

Controlled, per standard specification

Cycle Counter

Digital counter with auto-stop

Drive

Electric motor

Standards

IS 3400, DIN 53522

Power Supply

230V AC, single phase, 50 Hz

Certification

ISO 9001:2015 certified manufacturing

Industries We Serve in Telangana

Bennewart fits outsole-type specimens and SATRA TM161 material cut growth. Glove and thin-component specifications more often call for Ross or De Mattia (ISO 132) flexing – confirm which your buyer cites. Which flex tester suits which rubber product? Bennewart for outsoles and soling sheet, Ross (ASTM D1052 / IS 3400 Part 16) for a pierced strip bent over a rod, and De Mattia (ISO 132) for a grooved moulded strip checked for crack initiation and growth.

Standards Compliance - ISO 17707, EN ISO 20344, SATRA TM161
Standard Method Test parameter

ISO 17707

Footwear outsole flex resistance (Bennewart)

Pre-cut outsole flexed; notch growth in mm

EN ISO 20344 / 20345

Safety footwear outsole flex

30,000 flexes; notch growth in mm

SATRA TM161

Bennewart flex test – cut growth

90° flex; outsole cut growth, crack initiation, or material cut growth

ASTM D1052 / IS 3400 Part 16

Ross flexing – a different machine

Pierced strip bent 90° over a rod; cut growth tracked

What is the difference between a Bennewart and a Ross flex tester? Both measure cut growth under 90° bending, but they are different machines with different specimens, so results are not interchangeable. Note that ASTM D1052 is the Ross method; Bennewart follows ISO 17707 and SATRA TM161. How does an ISO 132 De Mattia test differ from a Bennewart test? ISO 132 flexes a grooved, moulded rubber strip and rates crack initiation and growth, while a Bennewart flexes a notched sole or sheet specimen through 90° under ISO 17707 or SATRA TM161, so the two results answer different questions.

Why Choose Finetech Bennewart Flex Tester in Telangana

Manufacturer, not a trader. A laboratory testing equipment manufacturer that labs in Telangana deal with directly. You reach the factory, not a dealer, and the same team quotes a Ross or De Mattia if your product needs one.

NABL traceable, ISO 9001:2015. CE marked; direct factory supply – we quote your flex endurance tester for footwear rubber against your standard.

Direct dispatch from Thane since 2023. Labs in Hyderabad and Secunderabad buy from us directly; we dispatch from Thane with installation and AMC. Hyderabad labs can approach us with the product drawing first and the machine choice second.

See the full specifications on our main Bennewart flex tester page. We also supply and install Bennewart flex testers in other states: Bennewart flex tester in Andhra Pradesh · Bennewart flex tester in Gujarat · Bennewart flex tester in Karnataka · Bennewart flex tester in Maharashtra · Bennewart flex tester in Tamil Nadu.

Related Products
Product Why Related

Demattia Flex Tester

Complementary flex testing for standard-thickness specimens

Ross Flex Tester

Complementary cut growth testing

DIN Abrasion Tester

Complementary abrasion testing

Universal Testing Machine (UTM)

Complementary tensile testing

Specimen Cutters & Moulds

Specimen preparation tools

Cadbury logo
Aditya Birla Group logo
ELGI Rubber logo
Nestlé logo
ITC Limited logo
Blue Star logo
Hindustan Unilever logo
Brahmins logo
Nirapara logo
Pidilite logo

Request a Free Quote

All Equipments & specimen preparation products can be customised as per requirements.

All Equipments and specimen preparation products can be customised as per requirements
Name
Email
Phone Number
Message
Common Questions

FAQ - Bennewart Flex Tester in Telangana

Our Bennewart flex testers measure cut or crack growth in outsole and soling material under repeated 90° flexing - that is the Bennewart flex test in one line. For thin rubber components, see the FAQ below.

ISO 17707, the outsole-flex clauses of EN ISO 20344/20345, and SATRA TM161; under EN ISO 20344 the test runs 30,000 flexes. Asked about an IS 3400 flex test procedure? The Indian rubber cut-growth method we can confirm is IS 3400 Part 16, the Ross method; tell us the standard your buyer cites. Keep the ISO 17707 outsole flex test and the SATRA TM161 Bennewart flex test method on the Bennewart; an ISO 132 requirement needs a De Mattia, and ASTM D1052 a Ross.

Start from the standard named on the component drawing. None of the three machines is built around very thin finished parts; for compound screening, a De Mattia (ISO 132) moulded strip or a Ross (ASTM D1052) pierced strip is the usual route, and a Bennewart applies where the buyer names SATRA TM161 material cut growth. Because labs in Telangana can source all three from us, we quote whichever machine your drawing names.

Yes. We dispatch from Thane to Hyderabad and Secunderabad, and labs in Secunderabad can order the same way. Send your standard and specimen type for a quotation. There is no dealer in between, so you get the factory's own quote.

For a Bennewart flex tester price in India, we quote against your standard and specimen type - no invented figures. Send your requirement via the form or WhatsApp.

Ross flexing (ASTM D1052) bends a pierced rubber strip over a rod - see the comparison above; ASTM D1052 flex endurance testing of rubber is a Ross job. Bennewart tests outsoles and sole materials, not uppers. For which flex tester suits which product, and how De Mattia differs from Bennewart, see the Industries and Standards sections. For rubber gloves: not for finished gloves; see the Jeedimetla note above.