Finetech Engineering

Bennewart Flex Tester Manufacturer in Andhra Pradesh | Finetech Engineering

ISO 9001:2015 certified - Finetech Engineering
BIS standards compliant testing equipment - Finetech Engineering
20 years of experience in testing equipment - Finetech Engineering
100+ customers served - Finetech Engineering

Bennewart Flex Tester for Footwear Rubber Manufacturers in Andhra Pradesh

Finetech Engineering is a Bennewart flex tester manufacturer that footwear units in Andhra Pradesh buy from directly: manufacturer, not a trader, with each frame built at Wagle Estate, Thane. For a footwear or soling plant in Andhra Pradesh setting up its first QC lab, this flex endurance tester for footwear rubber is usually one of the first machines on the list: it bends a notched sole specimen through 90° and records how far the cut grows. As a Bennewart Flex Tester manufacturer that plants in Andhra Pradesh can commission alongside the production line, we configure it to the method your buyer specifies.

What is the Bennewart flex test? A pre-cut sole specimen is flexed repeatedly and the cut growth is read in millimetres after a fixed count. How many cycles does it run? 30,000 flexes in the ISO 17707 and EN ISO 20344 outsole tests. The ISO 17707 outsole flex test is the stand-alone footwear method, while the SATRA TM161 Bennewart flex test method adds outsole cut-growth, crack-initiation and material cut-growth variants.

Specifications

Parameter

Specification

Product Name

Bennewart Flex Tester (Thin Rubber Flexing Endurance Machine)

Test Method

Repeated flexing of thin rubber specimens to failure

Specimen

Thin rectangular rubber strip, 2–4 mm thick, per IS 3400/DIN 53522

Specimen Stations

Multiple (model-dependent)

Flexing Frequency

Controlled, per standard specification

Cycle Counter

Digital counter with auto-stop

Drive

Electric motor

Standards

IS 3400, DIN 53522

Power Supply

230V AC, single phase, 50 Hz

Certification

ISO 9001:2015 certified manufacturing

Industries We Serve in Andhra Pradesh

Outsole and rubber-compound flex data decides whether a compound goes forward. Upper materials are flexed on different equipment. Answering ‘why outsoles crack at the flex line’: the ball-of-foot crease bends with every step, so strain concentrates there, and a sharp tread groove, an under-cured or over-hard compound, or a moulding flaw gives a crack its starting point. The notch on a Bennewart specimen simulates that starting point.

Standards Compliance - ISO 17707, EN ISO 20344, SATRA TM161
Standard Method Test parameter

ISO 17707

Footwear outsole flex resistance (Bennewart)

Pre-cut outsole flexed; notch growth in mm

EN ISO 20344 / 20345

Safety footwear outsole flex

30,000 flexes; notch growth in mm

SATRA TM161

Bennewart flex test – cut growth

90° flex; outsole cut growth, crack initiation, or material cut growth

ASTM D1052 / IS 3400 Part 16

Ross flexing – a different machine

Pierced strip bent 90° over a rod; cut growth tracked

What is the difference between a Bennewart and a Ross flex tester? Both measure cut growth under 90° bending, but they are different machines with different specimens, so results are not interchangeable. Note that ASTM D1052 is the Ross method; Bennewart follows ISO 17707 and SATRA TM161. How does EN ISO 20344 differ from ISO 17707? EN ISO 20344 is the test-method standard behind EN ISO 20345 safety footwear, so its outsole-flex clause is one item in a safety-shoe certification; ISO 17707 is a stand-alone outsole flex method used for any footwear, including athletic and casual soles.

Why Choose Finetech Bennewart Flex Tester in Andhra Pradesh

Manufacturer, not a trader. A laboratory testing equipment manufacturer that labs in Andhra Pradesh deal with directly. Plants in Andhra Pradesh can bring us in at the lab-planning stage; we also advise on specimen cutting and bench layout.

NABL traceable, ISO 9001:2015. CE marked; direct factory supply, no reseller margin – we quote your flex endurance tester for footwear rubber against your standard.

Direct dispatch from Thane since 2023. Labs in Visakhapatnam and Vijayawada buy from us directly; we dispatch from Thane with installation and AMC. Weighing in-house vs outsourced outsole flex testing? An external lab suits occasional certification work; a machine on site gives a result on every new sole batch.

See the full specifications on our main Bennewart flex tester page. We also supply and install Bennewart flex testers in other states: Bennewart flex tester in Gujarat · Bennewart flex tester in Karnataka · Bennewart flex tester in Maharashtra · Bennewart flex tester in Tamil Nadu · Bennewart flex tester in Telangana.

Related Products
Product Why Related

Demattia Flex Tester

Complementary flex testing for standard-thickness specimens

Ross Flex Tester

Complementary cut growth testing

DIN Abrasion Tester

Complementary abrasion testing

Universal Testing Machine (UTM)

Complementary tensile testing

Specimen Cutters & Moulds

Specimen preparation tools

Cadbury logo
Aditya Birla Group logo
ELGI Rubber logo
Nestlé logo
ITC Limited logo
Blue Star logo
Hindustan Unilever logo
Brahmins logo
Nirapara logo
Pidilite logo

Request a Free Quote

All Equipments & specimen preparation products can be customised as per requirements.

All Equipments and specimen preparation products can be customised as per requirements
Name
Email
Phone Number
Message
Common Questions

FAQ - Bennewart Flex Tester in Andhra Pradesh

Our Bennewart flex testers measure cut or crack growth in outsole and soling material under repeated 90° flexing. It shows in practice why outsoles crack at the flex line long before the tread wears out.

ISO 17707, the outsole-flex clauses of EN ISO 20344/20345, and SATRA TM161; under EN ISO 20344 the test runs 30,000 flexes. Asked about an IS 3400 flex test procedure? The Indian rubber cut-growth method we can confirm is IS 3400 Part 16, the Ross method; tell us the standard your buyer cites. Where both appear in a buyer's specification, the SATRA TM161 Bennewart flex test method and the ISO 17707 outsole flex test run on the same Finetech frame with the matching clamp and mandrel set.

A typical starting list covers outsole flex (the Bennewart), hardness, abrasion, and tensile and tear tests with specimen cutters; safety footwear adds slip, toe-cap and penetration tests under EN ISO 20344. On in-house vs outsourced outsole flex testing, the more often you mould new sole batches, the stronger the case for a tester on site. For labs in Andhra Pradesh planning a new setup, we quote the Bennewart and specimen cutters together.

Yes. We dispatch from Thane to Visakhapatnam and Vijayawada, and labs in Vijayawada can order the same way. Send your standard and specimen type for a quotation. There is no dealer in between, so you get the factory's own quote.

For a Bennewart flex tester price in India, we quote against your standard and specimen type - no invented figures. Send your requirement via the form or WhatsApp.

Ross flexing (ASTM D1052) bends a pierced rubber strip over a rod - see the comparison above; ASTM D1052 flex endurance testing of rubber is a Ross job. Bennewart tests outsoles and sole materials, not uppers. For how EN ISO 20344 differs from ISO 17707, see the Standards section.