Finetech Engineering

Bennewart Flex Tester Manufacturer in Karnataka | Finetech Engineering

Bennewart Flex Tester for Safety Footwear & Rubber Goods in Karnataka

Finetech Engineering is a Bennewart flex tester manufacturer that safety-footwear labs in Karnataka buy from directly: manufacturer, not a trader, built at Wagle Estate, Thane. Safety shoes sold in India need BIS certification, so this flex endurance tester for footwear rubber is set up for Indian as well as export reports: it flexes a notched outsole through 90° and records how far the cut grows. As a Bennewart Flex Tester manufacturer that BIS-licensed plants in Karnataka can buy from directly, we configure each unit to the clause your licence calls for.

What is the Bennewart flex test? A notched outsole test piece bends repeatedly through 90°, and the cut is re-measured in millimetres at the end of the run. How many cycles does it run? 30,000 flexes in the ISO 17707 and EN ISO 20344 outsole tests. For IS 15298 safety footwear testing, the outsole-flex test follows the same method family, because IS 15298 is aligned with the ISO 20344/20345 pair.

Specifications

Parameter

Specification

Product Name

Bennewart Flex Tester (Thin Rubber Flexing Endurance Machine)

Test Method

Repeated flexing of thin rubber specimens to failure

Specimen

Thin rectangular rubber strip, 2–4 mm thick, per IS 3400/DIN 53522

Specimen Stations

Multiple (model-dependent)

Flexing Frequency

Controlled, per standard specification

Cycle Counter

Digital counter with auto-stop

Drive

Electric motor

Standards

IS 3400, DIN 53522

Power Supply

230V AC, single phase, 50 Hz

Certification

ISO 9001:2015 certified manufacturing

Industries We Serve in Karnataka

Safety-footwear outsoles are Bennewart’s home ground. Thin rubber sheet specifications more often call for Ross or De Mattia (ISO 132) flexing, and upper materials are flexed on different equipment. Which tests does a safety shoe need before certification? Typically toe-cap impact (200 J) and compression (15 kN), upper-to-sole bond strength, outsole abrasion and flex resistance, slip resistance, and class-specific tests such as antistatic, energy absorption and penetration resistance. The Bennewart covers only the outsole-flex item.

Standards Compliance - ISO 17707, EN ISO 20344, SATRA TM161
Standard Method Test parameter

ISO 17707

Footwear outsole flex resistance (Bennewart)

Pre-cut outsole flexed; notch growth in mm

EN ISO 20344 / 20345

Safety footwear outsole flex

30,000 flexes; notch growth in mm

SATRA TM161

Bennewart flex test – cut growth

90° flex; outsole cut growth, crack initiation, or material cut growth

ASTM D1052 / IS 3400 Part 16

Ross flexing – a different machine

Pierced strip bent 90° over a rod; cut growth tracked

What is the difference between a Bennewart and a Ross flex tester? Both measure cut growth under 90° bending, but they are different machines with different specimens, so results are not interchangeable. Note that ASTM D1052 is the Ross method; Bennewart follows ISO 17707 and SATRA TM161. What do EN ISO 20345 S1, S2 and S3 require for outsole flex? For rubber and polymer outsoles, flex resistance sits in the basic outsole requirements that S1, S2 and S3 share rather than being added by one class; S2 adds water resistance of the upper, and S3 adds penetration resistance and a cleated outsole.

Why Choose Finetech Bennewart Flex Tester in Karnataka

Manufacturer, not a trader. A laboratory testing equipment manufacturer that labs in Karnataka deal with directly. Karnataka plants deal with us at the factory, and we also confirm which IS 15298 clause each unit is set up for.

NABL traceable, ISO 9001:2015. CE marked; direct factory supply – we quote your flex endurance tester for footwear rubber against your standard.

Direct dispatch from Thane since 2023. Labs in Bangalore and Mysore buy from us directly; we dispatch from Thane with installation and AMC. There is no dealer in the chain; Peenya buyers get the factory’s own quote.

See the full specifications on our main Bennewart flex tester page. We also supply and install Bennewart flex testers in other states: Bennewart flex tester in Andhra Pradesh · Bennewart flex tester in Gujarat · Bennewart flex tester in Maharashtra · Bennewart flex tester in Tamil Nadu · Bennewart flex tester in Telangana.

Related Products
Product Why Related

Demattia Flex Tester

Complementary flex testing for standard-thickness specimens

Ross Flex Tester

Complementary cut growth testing

DIN Abrasion Tester

Complementary abrasion testing

Universal Testing Machine (UTM)

Complementary tensile testing

Specimen Cutters & Moulds

Specimen preparation tools

Cadbury logo
Aditya Birla Group logo
ELGI Rubber logo
Nestlé logo
ITC Limited logo
Blue Star logo
Hindustan Unilever logo
Brahmins logo
Nirapara logo
Pidilite logo

Request a Free Quote

All Equipments & specimen preparation products can be customised as per requirements.

All Equipments and specimen preparation products can be customised as per requirements
Name
Email
Phone Number
Message
Common Questions

FAQ - Bennewart Flex Tester in Karnataka

Our Bennewart flex testers measure cut or crack growth in safety-footwear outsoles under repeated 90° flexing - that is the Bennewart flex test in practice. In a BIS-licensed plant, it is the machine behind the outsole-flex line of IS 15298 safety footwear testing.

ISO 17707, the outsole-flex clauses of EN ISO 20344/20345, and SATRA TM161; under EN ISO 20344 the test runs 30,000 flexes. Asked about an IS 3400 flex test procedure? The Indian rubber cut-growth method we can confirm is IS 3400 Part 16, the Ross method; tell us the standard your buyer cites. Export buyers usually cite the ISO 17707 outsole flex test or the SATRA TM161 Bennewart flex test method; safety shoes sold in India are certified against IS 15298.

Safety footwear sold in India must carry the ISI mark under the Personal Protective Equipment - Footwear (Quality Control) Order, 2020, against IS 15298 Part 2. The licence process includes a BIS factory inspection and test reports, and applications typically list the plant's own testing facilities, so check the current scheme of inspection and testing for which tests must be done in-house. For the tests a safety shoe needs before certification, see the list in the Industries section. Karnataka plants can visit us at Wagle Estate; we supply the Bennewart for the outsole-flex test.

Yes. We dispatch from Thane to Bangalore and Mysore, and labs in Mysore can order the same way. Send your standard and specimen type for a quotation. There is no dealer in between, so you get the factory's own quote. Delivery includes installation and operator training, so Bangalore labs can run the safety footwear outsole flex test from day one.

For a Bennewart flex tester price in Karnataka, we quote against your standard and specimen type - no invented figures. Send your requirement via the form or WhatsApp.

Ross flexing (ASTM D1052) bends a pierced rubber strip over a rod - see the comparison above; ASTM D1052 flex endurance testing of rubber is a Ross job. Bennewart tests outsoles and sole materials, not uppers. For the EN ISO 20345 S1 S2 S3 outsole flex requirement, see the Standards section: it is the same Bennewart test in every class.